Why won't my Rockwell versacut RK3440K Saw blade cut a straight line?
If your Rockwell Saw blade won't cut straight, it might be due to a dull blade. Try mounting a new, sharp blade. Also, make sure the blade is properly mounted. If the issue persists, consider using an edge guide to ensure the saw is guided correctly.
What to do if my Rockwell Saw won't start?
If your Rockwell Saw won't start when you operate the on/off switch, first, check to make sure the power cord is well connected to a working outlet. If it's still not working, the power cord might be broken and should be replaced by a qualified maintenance person after unplugging it. Another potential cause is a worn-down carbon brush, which should also be replaced by a qualified maintenance person.
General| Type | Circular Saw |
|---|---|
| No Load Speed | 3500 RPM |
| Cord Length | 6 feet |
| Voltage | 120V |
| Arbor Size | 3/8 inches |
| Max Cutting Depth at 90 degrees | 2-7/16 inches |
| Depth of Cut at 90° | 2-7/16 inches |
To Next Page