Setup
1MA236_0e Rohde & Schwarz Remote Operation of Windows Based T&M Instruments with Android Tablets 12
Fig. 8: Files for the Wi-Fi bus driver
2 Install the WLAN USB Adapter
Proceed in the same way as for the Windows XP installation.
3 Configure the Network Settings
Proceed in the same way as for the Windows XP installation.
4 Configure Auto-Start of the ad hoc WLAN Network
The "start wlan adhoc network.bat" configuration, provided together with this applica-
tion note, is used (alternatively, you might create this file by yourself).
1. Copy the "start wlan adhoc network.bat" file into the "Start menu/All Pro-
grams/Startup" directory of the T&M instrument.
2. Right-click on the file and select "Edit" from the context window.
The file is opened with Windows Notepad.
Fig. 9: Configuring the ad hoc WLAN network
3. Edit the file as follows:
Replace "myssid" by the same network name (e.g. "SFC-100234") as set dur-
ing the configuration of the network settings in the previous section.
This network name will appear in the list of wireless networks on the tablet.
Replace "mypassword" by the network key as set during the configuration of
the network settings in the previous section.
You will have to enter this password at the tablet during establishment of the
WLAN connection.
4. Save and close the file.
5. Restart the T&M instrument (alternatively, you can also run the .bat file).
To Next Page
Loading...
Need help?
General
