Operation
1MA236_0e Rohde & Schwarz Remote Operation of Windows Based T&M Instruments with Android Tablets 21
After disconnecting the 2X Client screen shows the available connections.
Alternative:
1. Move the cursor of the virtual mouse to the bottom edge of the screen.
The Windows taskbar is shown.
2. Click on "Start".
3. Click on "Disconnect".
Fig. 21: Disconnect via Windows taskbar
If you re-connect to the T&M instrument after having disconnected before, 2X Client
automatically logs in if you have entered user name and password during configuration
of your RDP connection.
Note:
A remote log off from the T&M instrument or shutdown via the 2X Client App or the
Windows taskbar is not supported.
To Next Page
Loading...
