Rohde & Schwarz FPC Series User Manual

Function Reference
R&S
®
FPC
374User Manual 1178.4130.02 ─ 07
Show Limit Lines
See "Hiding a limit line" on page 132.
Remote command:
CALCulate<n>:LIMit<k>:STATe on page 293
Upper Limit
See "Selecting a limit line" on page 131, "Using a threshold line" on page 131 and
"Removing limit lines" on page 132.
Remote command:
Threshold line: CALCulate<n>:LIMit<k>:UPPer:THReshold on page 295
Custom line: CALCulate<n>:LIMit<k>:UPPer:SELect on page 294
Removal: CALCulate<n>:LIMit<k>:DELete on page 291
Limit check: CALCulate<n>:LIMit<k>:FAIL? on page 291
Lower Limit
See "Selecting a limit line" on page 131, "Using a threshold line" on page 131 and
"Removing limit lines" on page 132.
Remote command:
Threshold line: CALCulate<n>:LIMit<k>:LOWer:THReshold on page 292
Custom line: CALCulate<n>:LIMit<k>:LOWer:SELect on page 292
Removal: CALCulate<n>:LIMit<k>:DELete on page 291
Limit check: CALCulate<n>:LIMit<k>:FAIL? on page 291
Audio Beep
See "Performing limit checks" on page 132.
Remote command:
CALCulate<n>:LIMit<k>:BEEP[:STATe] on page 289
20.4.18 Marker Menu
Access: [Mkr]
Marker <x>..................................................................................................................374
Marker Type................................................................................................................ 375
Marker Mode...............................................................................................................375
Marker Demodulation..................................................................................................375
All Markers On............................................................................................................ 375
Marker Display............................................................................................................ 375
All Markers Off.............................................................................................................376
Marker <x>
See "Positioning a marker" on page 121 and "Adding additional markers" on page 121.
Remote command:
Marker state: CALCulate<n>:MARKer<m>[:STATe] on page 278
Marker position (x-axis): CALCulate<n>:MARKer<m>:X on page 279
Marker position (y-axis):CALCulate<n>:MARKer<m>:Y? on page 281
Delta marker state: CALCulate<n>:DELTamarker<m>[:STATe] on page 273
Function Reference: Spectrum Application

Rohde & Schwarz FPC Series Specifications

General

Brand	Rohde & Schwarz
Model	FPC Series
Category	Measuring Instruments
Language	English