Rohde & Schwarz FPC Series User Manual

Function Reference
R&S
®
FPC
378User Manual 1178.4130.02 ─ 07
Detector.......................................................................................................................378
Refresh Max Hold....................................................................................................... 378
View Peak List.............................................................................................................378
Bargraph
See "Selecting bargraph measurements" on page 135.
Remote command:
[SENSe:]FREQuency:MODE on page 296
Frequency Scan
See "Selecting frequency scans" on page 136.
Remote command:
[SENSe:]FREQuency:MODE on page 296
Show Bargraph 2
See "Displaying a second bargraph" on page 135.
(Only for bargraph measurements.)
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>[:STATe] on page 268
Show Trace 2
See "Displaying a second trace" on page 137.
(Only for frequency scans.)
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>[:STATe] on page 268
Detector
See Chapter 15.6, "Trace Configuration", on page 144.
Remote command:
[SENSe:]DETector<t>[:FUNCtion] on page 300
Refresh Max Hold
See "Resetting the max hold " on page 138.
Remote command:
DISPlay:BARGraph:PHOLd:RESet on page 296
View Peak List
See "Displaying the peak list" on page 137.
(Only for frequency scans.)
Remote command:
not supported
20.5.2 Frequency Menu
Access: [Freq]
Function Reference: Receiver Application

Rohde & Schwarz FPC Series Specifications

General

Brand	Rohde & Schwarz
Model	FPC Series
Category	Measuring Instruments
Language	English