Rohde & Schwarz FPC Series User Manual

Function Reference
R&S
®
FPC
404User Manual 1178.4130.02 ─ 07
Set To Peak.................................................................................................................404
Set To Next Peak........................................................................................................ 404
Set To Minimum.......................................................................................................... 404
All Markers To Peak.................................................................................................... 404
Center = Marker / Level = Marker............................................................................... 404
Marker Tracking.......................................................................................................... 404
Select Marker..............................................................................................................404
Search Range............................................................................................................. 405
Set To Peak
See "Positioning markers automatically" on page 123.
Remote command:
Marker: CALCulate<n>:MARKer<m>:MAXimum[:PEAK] on page 277
Delta marker: CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK] on page 272
Set To Next Peak
See "Positioning markers automatically" on page 123.
Remote command:
Marker: CALCulate<n>:MARKer<m>:MAXimum:NEXT on page 277
Delta marker: CALCulate<n>:DELTamarker<m>:MAXimum:NEXT on page 272
Set To Minimum
See "Positioning markers automatically" on page 123.
Remote command:
Marker: CALCulate<n>:MARKer<m>:MINimum[:PEAK] on page 278
Delta marker: CALCulate<n>:DELTamarker<m>:MINimum[:PEAK] on page 273
All Markers To Peak
See "Positioning markers automatically" on page 123.
Remote command:
not supported
Center = Marker / Level = Marker
See "Positioning markers automatically" on page 123.
Remote command:
Center = marker frequency: CALCulate<n>:MARKer<m>:FUNCtion:CENTer
on page 276
Ref level = marker level: CALCulate<n>:MARKer<m>:FUNCtion:REFerence
on page 276
Marker Tracking
See "Keeping the marker on the peak" on page 124.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:STRack[:STATe] on page 277
Select Marker
See "Selecting a marker" on page 123.
Function Reference: Vector Network Analyzer

Rohde & Schwarz FPC Series Specifications

General

Brand	Rohde & Schwarz
Model	FPC Series
Category	Measuring Instruments
Language	English