R&S FSH Putting into Operation
Configuring the R&S FSH
Quick Start Guide 1309.6269.12 - 09 34
1.6.2 Configuring Antennas
You can use the log-periodic antenna R&S HL300 (order no. 4097.3005.02) or the
active directional antenna R&S HE300 with the R&S FSH to locate potential interfering
sources.
For a comprehensive description of the antennas and their functionality, refer to the
user manuals delivered with the product.
Both antennas feature a GPS receiver and an electronic compass. You can control the
GPS receiver of the antennas as described in "Using the GPS Receiver".
► To work with the R&S HL300, connect it to the AUX input and the RF input.
► To work with the R&S HE300, connect it to the power sensor connector.
The "Instrument Setup" dialog box provides all settings necessary to control the
antenna.
Enabling the antenna
► In the "Instrument Setup" dialog box, select the "HL300 Antenna" or the "HE300
Antenna" item.
► Press the ENTER key.
The R&S FSH opens a dropdown menu to select the connected antenna model.
► Turn the antenna on or off.
► Confirm the selection with the ENTER key.
Enabling the compass
The antennas feature an electronic compass to determine directions precisely.
► In the "Instrument Setup" dialog box, select the "Compass" item.
► Press the ENTER key.
The R&S FSH opens a dropdown menu to turn the compass on and off.
► Turn the compass on or off.
► Confirm the selection with the ENTER key.
Note that the R&S FSH also shows the magnetic declination of your current position in
the dialog box when you turn on the compass.
To Next Page
Loading...
