Preparing for Use
R&S
®
FSVA/FSV
41Quick Start Guide 1321.3066.02 ─ 06
4. Insert the rechargeable batteries into the charging slots of the charger.
Figure 4-2: R&S
FSVA/FSV
‑
B34 charger
LEDs indicate the operating state of each charging slot:
● Charging
Green LED flashes
● Charging completed
Green LED remains lit
● Fault
Red LED lights up
5. When charging has been completed, the rechargeable batteries can be
removed from the charger. The LCD on the front of the rechargeable battery
indicates the charge level in increments of 20 %.
6. Insert the rechargeable batteries into the battery pack and close the flap on
the front. Secure the flap using the two knurled screws.
Putting into Operation
To Next Page
Loading...
