Preparing for Use
R&S
®
FSVA/FSV
50Quick Start Guide 1321.3066.02 ─ 06
4. Using a finger or any other pointing device, press the 4 markers on the
screen.
The touchscreen is aligned according to the executed pointing operations.
4.4.5 Setting the Screen Colors
To change the colors of the displayed objects, two default color settings are provi-
ded. Alternatively, you can change the color of objects individually using prede-
fined colors or using colors of your own definition.
Some color settings are defined by the selected theme, see Chapter 6.4.9,
"Selecting a Theme", on page 96, and cannot be changed individually.
4.4.5.1 Displaying the Screen Colors Submenu
1. Press the SETUP key.
2. Press the "Display Setup" softkey.
3. Press the "More" softkey.
4. Press the "Screen Colors" softkey.
The "Screen Colors" submenu is displayed.
4.4.5.2 Using the Default Color Settings
To select the default setting for brightness, tint and color saturation of all screen
objects:
1. In the "Screen Colors" submenu (see Chapter 4.4.5.1, "Displaying the Screen
Colors Submenu", on page 50), press the "Set to Default" softkey.
The "Set User Colors to Default" dialog box is displayed.
2. Select one of the default color sets. The color schemes are selected in such a
manner that all screen elements are visible optimally regardless whether
R&S FSVA/FSV Setup
To Next Page
Loading...
