Rohde & Schwarz FSWP26 - 8.8 Importing and Exporting I;Q Data

Remote Commands for the I/Q Analyzer
R&S
®
FSWP
147User Manual 1177.5856.02 ─ 07
CALCulate<n>:SGRam:LAYout <State>
CALCulate<n>:SPECtrogram:LAYout <State>
This command selects the state and size of spectrograms.
The command is available for result displays that support spectrograms.
Suffix:
<n>
.
Window
Parameters:
<State> FULL
Only the spectrogram is displayed, the trace diagram is not.
SPLIT
Spectrogram and trace diagram share a window.
OFF
Only the trace diagram is displayed, the spectrogram is not.
*RST: OFF
Example:
CALC4:SPEC:LAY FULL
Shows the spectrogram in window 4. The corresponding trace
diagram is hidden.
Manual operation: See "State" on page 69
CALCulate<n>:SPECtrogram:TRACe <Trace>
CALCulate<n>:SGRam:TRACe <Trace>
Suffix:
<n>
.
Window
Parameters:
<Trace> TRACe1 | TRACe2 | TRACe3 | TRACe4 | TRACe5 | TRACe6
Manual operation: See "Trace" on page 70
8.8 Importing and Exporting I/Q Data
Alternatively to capturing I/Q data by the I/Q Analyzer itself, stored I/Q data from previ-
ous measurements or other applications can be imported to the I/Q Analyzer. Further-
more, I/Q data processed in the I/Q Analyzer can be stored to a file for further evalua-
tion in other applications.
For details on importing and exporting I/Q data see Chapter 4.4, "I/Q Data Import and
Export", on page 27.
MMEMory:LOAD:IQ:STATe............................................................................................. 148
MMEMory:STORe<n>:IQ:COMMent................................................................................ 148
MMEMory:STORe<n>:IQ:STATe......................................................................................148
Importing and Exporting I/Q Data