Instrument Tour
R&S
®
FPL1000
49Getting Started 1179.4657.02 ─ 10
5.2.11 USB
The rear panel provides two additional female USB (3.0 standard) connectors to
connect devices like a keyboard, a mouse or a memory stick (see also Chap-
ter 5.2.11, "USB", on page 49).
5.2.12 LAN
The R&S FPL1000 is equipped with a 1 GBit Ethernet IEEE 802.3u network inter-
face with Auto-MDI(X) functionality. The assignment of the RJ-45 connector sup-
ports twisted-pair category 5 UTP/STP cables in a star configuration (UTP stands
for unshielded twisted pair, and STP for shielded twisted pair).
For details, see the R&S FPL1000 user manual.
5.2.13 DVI
You can connect an external monitor or other display device to the R&S FPL1000
via the DVI (Digital visual interface) connector to provide an enlarged display.
For details, see Chapter 4.14, "Considerations for Test Setup", on page 34.
5.2.14 Device ID
The unique device identifier is provided as a barcode sticker on the rear panel of
the R&S FPL1000.
It consists of the device order number and a serial number.
Rear Panel View
To Next Page
Loading...
