Operating the Instrument
R&S
®
FPL1000
78Getting Started 1179.4657.02 ─ 10
Trace Information in Window Title Bar
Information on the displayed traces is indicated in the window title bar.
1 3 4 5
2
(1) Trace color
Color of trace display in diagram
(2) Trace no.
Trace number (1 to 6)
(3) Detector
Selected detector:
AP AUTOPEAK detector
Pk MAX PEAK detector
Mi MIN PEAK detector
Sa SAMPLE detector
Av AVERAGE detector
Rm RMS detector
(4) Trace Mode
Sweep mode:
Clrw CLEAR/WRITE
Max MAX HOLD
Min MIN HOLD
Avg AVERAGE (Lin/Log/Pwr)
View VIEW
(5) Smoothing factor Smth Smoothing factor, if enabled.
7.1.3 Marker Information
Marker information is provided either in the diagram grid or in a separate marker
table, depending on the configuration.
Marker information in diagram grid
Within the diagram grid, the x-axis and y-axis positions of the last two markers or
delta markers that were set are displayed, if available, as well as their index. The
Understanding the Display Information - Spectrum Mode
To Next Page
Loading...
