Rohde & Schwarz SMB100A - Rear Panel Tour

Instrument Tour
R&S
®
SMB100A
49Quick Start Guide 1407.0812.62 ─ 20
RF Option Microwave Option
Frequency options Connector
type
Frequency options Connector
type
R&S SMB- B101
N female
R&S SMB-B112/-112L
test port
adapter, PC 3.5
mm female
R&S SMB-B102 R&S SMB-B120/-B120L
R&S SMB-B103 R&S SMB-B131
R&S SMB-B140/-140L/-B140N
test port
adapter, PC
2.92 mm female
R&S SMB-B106
NOTICE! Risk of RF connector and cable damage. If you tighten the connectors too
strongly, you can damage the cables and connectors. If you do not tighten the connec-
tors enough, the measurement results can be inaccurate.
Always use an appropriate torque wrench suitable for this type of connector and apply
the torque specified in the application note 1MA99.
The application notes are available on the Internet and provide additional information
on care and handling of RF connectors.
Rohde & Schwarz offers appropriate torque wrenches for various connectors. For
ordering information, see the R&S SMB data sheet or product brochure.
5.2 Rear Panel Tour
This section gives an overview of connectors on the rear panel of the instrument. Each
connector is briefly described and a reference is given to the chapters containing
detailed information. For technical data of the connectors refer to the data sheet.
For more detailed information, refer to the corresponding description in the Operating
Manual.
Rear Panel Tour