Instrument Control
R&S
®
SMB100A
85Quick Start Guide 1407.0812.62 ─ 20
the extension is assigned automatically and cannot be entered. The file is saved to the
selected path.
In addition to the files saved by the user, some menus also offer files containing prede-
fined contents. These files are saved to a specific directory on system drive; for this
reason, this directory cannot be chosen from the "File Select" menu.
Working with the File Select dialog
1. Access the "File Select" dialog (see "Accessing files with user data" on page 84).
2. Navigate in the "File Select" dialog.
3. Load an existing file.
In the "Recall Settings" dialog, mark a file and press the "Select" button.
4. Save a file.
In the "Save Settings" dialog, enter file name in the "File Name:" field.
Select the directory to which the file is to be saved and then select the "Save" but-
ton.
5. Create a new file.
To create a new file, use the "Save Settings" functionality, i.e. specify file name and
directory and save the file.
The created file is empty; it must be filled with the necessary values in the individ-
ual editor.
8.1.8.2 File Manager
The "File Manager" allows general file management such as copying, shifting, renam-
ing and deleting files as well as generating new directories.
Use the "File Type" to select a file type from the list. This can be used to process either
all files (all files (*) selection) or a specific selection of files. See "Extensions for user
files" on page 86 for an overview of the supported file extensions. The available
drives and directories and the files of the selected directory are displayed. The cur-
rently selected path is displayed above the windows. If the area is opened several
times, the path last selected is displayed. Unlike the "File Select" window, the "File
Manager" displays the full file names including extensions.
Manual Operation
To Next Page
Loading...
