Rohde & Schwarz XT 4410A - Page 146

065 75$16&(,9(5  ; $  ; $
Operator’s Manual • Use under Special Conditions
– 3.32 – 6076.0822.12.01
 0HQX5$',2,19(1725<
This menu gives a survey of all hardware, software and firmware components installed in
M3SR Transceiver X. 4410A or X. 4460A.
Starting point: Menu 400, page 1 (RADIO MAINTENANCE)
+ Press softkey (4) and the following display appears:
No. Control Action Notes
2 Press softkey
EQUIP.
Select setting.
Selection of equipment for radio inven-
tory
Depending on the item selected the fol-
lowing components are listed:
$//
all components installed
&/ components of CL1
): firmware components
+: all hardware components
6: all software components
+:02' name of the HW module article
6:02' name of the SW module article
'(9 XT 4410A or X. 4460A
softkey INVENTORY...
see Appendix A1
Slot No. (see Menu 510)
T
ypes:
D
EV - device, e.g. XT 4410A
S
WM - identifier for software package
S
W - identifier for software
F
W - identifier for firmware
H
WM - identifier for hardware module
H
W - identifier for hardware

0HQX
Hardware installation
slot