Rohde & Schwarz XT 4410A - Use under Normal Conditions; Introduction to Operation

065 75$16&(,9(5  ; $  ; $
Operator’s Manual • Use under Normal Conditions
6076.0822.12.01 – 2.1 –
8VH XQGHU 1RUPDO &RQGLWLRQV
 ,QWURGXFWLRQ
This chapter provides information concerning
q Unpacking and checking
q Installation into a 19" rack
q Basic cabling
q Operation
- Introduction to Displays and Controls
- Switching the Transceiver On and Off
- Menu RADIO CONNECTION
- Menu COMLINE SESSION
- Menu MAIN
- Menu MANUAL FIX. FRQ
- Menu USER PRESET FIX.FRQ
- Menu EMERGENCY MODE
 8QSDFNLQJDQG&KHFNLQJ
After delivery carry out the following steps:
1. Unpack the transceiver.
2. Check if delivery (transceiver and accessories) is complete by referring to the delivery
note.
3. Check the transceiver and accessories for signs of damage which may have occurred
during transit.
4. Contact the shipping agent immediately, if damage is found.
5. Keep the packaging (box etc.) for later use, e.g. if the transceiver is to be sent to the near-
est R&S representative for repair (see address list following the title page of this manual).