065 75$16&(,9(5 ; $ ; $
Operator’s Manual • Malfunction
6076.0822.12.01 – 4.21 –
0HQX&8.(<%2$5'7(67
In the Keyboard Test the keyboard is checked for proper functioning. For this test the operator
should press all keys and softkeys one after the other. The display shows which key has just
been pressed. The keyboard test can be stopped any time by pressing keys ESC/CLR and
ENT simultaneously.
When triggering the IBIT in Menu 805 the keyboard test is started automatically.
Starting point: Menu 805 (CU IBIT RESULTS)
+ Press softkey (14) and the following display appears:
softkey KEYBD TEST...
After ten seconds the display returns to Menu 805.
o
r:
+ Press keys ESC/CLR plus ENT at the same time.
To Next Page
Loading...
