Rohde & Schwarz XT 4410A - Remote Control Protocols

065 75$16&(,9(5  ; $  ; $
Operator’s Manual • Technical Information
6076.0822.12.01 – A1.27 –
$ 5HPRWH&RQWURO
For remote control of the M3SR Transceiver two different serial connections may be used:
*) The protocol and the serial port standard for the serial connection X24 can be configured
via Menu 425 (SERIAL CONTROL INTERFACE).
The following table shows the difference between the protocols:
x = supported FF = fixed frequency
6HULDO
&RQQHFWLRQ
6HULDO3RUW
6WDQGDUG
3URWRFRO 1RWH
X6 / X20 LAN GB2PP
Multipoint connection
(TCP IP addressing)
X24
*)
RS232
RS422
GB2PP
Point-to-point connection
RS232
RS422
S400U
Point-to-point connection
RS485 S400U
Multipoint connection
(with CSMA/CD)
68 *%33
Operation mode:
• Manual
• Preset
• Emergency
;
(only FF)
;(only FF)
;(only FF)
;
;
;
Radio maintenance - ;
Preset Page setup - ;
CBIT status ;;
Error List:
• Read
• Clear
-
-
X
X
Start of IBIT - X
Session control - X