Rohde & Schwarz ZNB - Page 1062

Command Reference
R&S
®
ZNB/ZNBT
1062User Manual 1173.9163.02 ─ 54
With switch matrices, the return value is the total number of matrix test ports plus the
number of VNA ports that are not connected to a switch matrix.
Usage: Query only
8.3.10 MEMory
The MEMory... commands control the loaded recall sets of the analyzer.
Storing setups
The MEMory... commands do not affect any stored files. Use the MMEMory... com-
mands to store and load data and to manage files stored on a mass storage device.
MEMory:CATalog?....................................................................................................... 1062
MEMory:CATalog:COUNt?............................................................................................ 1062
MEMory:DEFine.......................................................................................................... 1062
MEMory:DELete[:NAME].............................................................................................. 1063
MEMory:DELete:ALL....................................................................................................1063
MEMory:SELect...........................................................................................................1063
MEMory:CATalog?
Returns the names of all loaded recall sets.
Example:
*RST; :MEM:DEF 'SET_2'
Create a recall set named 'Set_2' and make it the active recall
set.
MEM:CAT?
Query all recall sets. The response is 'Set1,SET_2'.
MMEM:STOR:STAT 1, 'C:\Users\Public\
Documents\Rohde-Schwarz\Vna\RecallSets\Set_2.znx'
MEM:DEL 'Set_2.znx'
Store the active recall set "Set_2" to a file, renaming it
"Set_2.znx". Close the setup.
Usage: Query only
MEMory:CATalog:COUNt?
Returns the number of loaded recall sets.
Usage:
Query only
MEMory:DEFine <Name>
Creates a new recall set<Name> using default settings for the traces, channels and
diagram areas. The created recall set becomes the active recall set.
SCPI Command Reference