Rohde & Schwarz ZNB - Page 1312

Command Reference
R&S
®
ZNB/ZNBT
1312User Manual 1173.9163.02 ─ 54
Suffix:
<Gen>
.
Number of the configured generator. This suffix is ignored; the
command affects all generators.
Example:
SYST:COMM:RDEV:GEN1:DEF 'Ext. Gen. 1', 'SME02',
'gpib0', '21'
SYST:COMM:RDEV:GEN2:DEF 'Ext. Gen. 2', 'SME02',
'gpib0', '22'
Configure two R&S SME02 generators as external generators
no. 1 and 2, assigning different names and GPIB addresses.
SYST:COMM:RDEV:GEN1:CAT?
Query the generator numbers. The response is '1, 2'.
SYST:COMM:RDEV:GEN1:COUN?
Query the number of configured generators. The response is 2.
Usage: Query only
Manual operation: See "Configured Devices" on page 727
SYSTem:COMMunicate:RDEVice:GENerator:COUNt?
Queries the number of configured external generators. The response is an integer
number of generators.
Example:
See SYSTem:COMMunicate:RDEVice:GENerator<Gen>:
CATalog?
Usage: Query only
SYSTem:COMMunicate:RDEVice:GENerator<Gen>:DEFine <GenName>, <Driver>,
<Interface>, <Address>[, <FastSweep>, <ExtReference>]
Configures an external generator and adds it to the list of available generators.
Suffix:
<Gen>
.
Number of the configured generator. Generators must be num-
bered in ascending order, starting with 1. If a number is re-used,
the previous generator configuration is overwritten. Generators
can be assigned several times so that the number of configured
generators is practically unlimited.
Parameters:
<GenName> Name of the external generator (string parameter). An empty
string means that no particular name is assigned to the genera-
tor.
SCPI Command Reference