GUI Reference
R&S
®
ZNB/ZNBT
739User Manual 1173.9163.02 ─ 54
In the "Edit" dialog select the appropriate VNA port or tap "Set Unused" to delete the
VNA port association.
Remote command:
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:CONFigure:MVNA
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:CONFigure:MLVNa
Edit Test Port Connection
To edit a test port connection, tap on the corresponding port symbol.
In the "Edit" dialog, select the appropriate test port or tap "Set Unused" to delete the
test port association.
Setup Softtool
To Next Page
Loading...
