Command Reference
R&S
®
ZNB/ZNBT
827User Manual 1173.9163.02 ─ 54
Suffix:
<Ph_pt>
.
This suffix is ignored.
Parameters:
<String> Path to the Touchstone file, either absolute or relative to the cur-
rent directory (see MMEMory:CDIRectory)
Manual operation: See "Load File / 1x Open Preset / 1x Short Preset " on page 595
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:OPEN
For a fixture modeling with the ISD tool and coupon type OPSHort1x (see
CALCulate:FMODel:ISD<Ph_pt>:COUPon:TYPE), this command starts the mea-
surement of the Open coupon at the active ports (see CALCulate:FMODel:
ISD<Ph_pt>:COUPon[:STATe]).
Suffix:
<Ph_pt>
.
This suffix is ignored.
Usage: Event
Manual operation: See "Measure / Measure Open / Measure Short" on page 594
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:OPEN:FILename <String>
For a fixture modeling with the ISD tool and coupon type OPSHort1x (see
CALCulate:FMODel:ISD<Ph_pt>:COUPon:TYPE), this command loads the proper-
ties of the Open coupon from a Touchstone file.
Suffix:
<Ph_pt>
.
This suffix is ignored.
Parameters:
<String> Path to the Touchstone file, either absolute or relative to the cur-
rent directory (see MMEMory:CDIRectory)
Manual operation: See "Load File / 1x Open Preset / 1x Short Preset " on page 595
CALCulate:FMODel:ISD<Ph_pt>:COUPon:MEASure:SHORt
For a fixture modeling with the ISD tool and coupon type OPSHort1x (see
CALCulate:FMODel:ISD<Ph_pt>:COUPon:TYPE), this command starts the mea-
surement of the Short coupon at the active ports (see CALCulate:FMODel:
ISD<Ph_pt>:COUPon[:STATe]).
Suffix:
<Ph_pt>
.
This suffix is ignored.
Usage: Event
Manual operation: See "Measure / Measure Open / Measure Short" on page 594
SCPI Command Reference
To Next Page
Loading...
