Ceramics: 06/2004
6
Display during the
firing process
Usually the green display shows you the current
nominal temperature during the firing process. While
the kiln is heating up this temperature will “count”
upwards according to the programme settings. Every
15 seconds the maximal temperature of the firing
curve will flash up. This makes it easy for you to
check if you have inserted the correct value without
having to press any button.
By means of the firing curve you can monitor how the
TC 504 executes the firing segments one by one.
The programme is finished, when the kiln has
reached 150° C during the cooling process. At that
moment the display (3) will show “End” for the end of
the programme (see diagram to the left).
To Next Page
