Need help?Do you have a question about the Rohde TC 504 and is the answer not in the manual?
Steps to power on the controller and begin a firing process.
How to modify firing curve values before or during a process.
Steps to start the selected firing programme after calling it up.
Setting the SKIP value to reach final temperature quickly during the second heating phase.
Shows control outlet status and information on special process events.
Displays power consumption and heating element operating time.
Events related to measurement input errors and safety circuit activation.
Events indicating kiln issues with temperature increase, control, or ramp switching.
Events related to firing continuation or abortion after power failures.
Events indicating internal controller problems or hardware failures requiring support.
Records important values like temperature and timing for the last 36 hours.
Records special events like programme interruptions or power failures, up to 50 events.
Presents parameters and provides warnings on settings and safety.
Detailed explanation of parameters like kiln performance, thermocouple type, and heating control.
Explains zone configuration, ramp input, and control outlet functions.
Details plug designations (HAN7D, HAN15D, CPC14) and their pinout connections.
Advice to compare thermocouple type with controller specification to prevent damage.
General| Category | Controller |
|---|---|
| Type | Temperature Controller |
| Control Algorithm | PID |
| Protection Rating | IP20 |
| Inputs | Thermocouple (Type K, J, T, N, S) |
| Outputs | Analog (0/4-20mA or 0-10V) |
| Display | LED |
| Power Supply | 24 V AC/DC |
| Operating Temperature | 0 to 50 °C |
To Next Page
