20
3: Art.#8803 – Rohloff E-14 Shifter Unit
The Rohloff E-14 Shifter Unit is the electromechanical component responsible for
physically shifting the gears of the SPEEDHUB 500/14.
The Shifter Unit is connected to the Rohloff E-14 DC/DC-CAN Converter via a purple, 6-
Pol, Higo connection.
4: Art.#8804-8810 Rohloff E-14 Cables
As the Rohloff DC/DC-CAN Converter is located roughly in the center of each frame and
the the Rohloff E-14 Shifter-Unit is located at the rear of the bicycle, on the SPEEDHUB
unit itself, a connection cable will be required to bridge that distance.
Due to the multitude of different frame sizes and forms, the length of cable required will
vary significantly. A selection of different cable lengths are thus available for all
applications:
Art.#8804 = 400 Millimeters
Art.#8805 = 500 Millimeters
Art.#8806 = 600 Millimeters
Art.#8807 = 700 Millimeters
Art.#8808 = 800 Millimeters
Art.#8809 = 900 Millimeters
Art.#8810 = 1000 Millimeters
To Next Page
Loading...
