9
ROHO Non-powered Mattress Overlays and Accessories Operation Manual
If the individual transfers off the overlay, follow these instructions to ensure correct adjustment:
1) Before the individual transfers back onto the overlay:
a) Make sure the sections are snapped together and lying flat.
b) For PRODIGY or SOFFLEX 2, make sure the overlay is securely attached to the bed mattress, either with the straps or with the
Overlay Enclosure Cover straps. Follow the instructions in this manual to install the straps or the Overlay Enclosure Cover.
2) Make sure the overlay is inflated and covered. Refer to the instructions in this manual.
3) The individual should transfer onto the overlay.
4) Perform a Hand Check to make sure the overlay is properly adjusted. Refer to the adjustment instructions in this manual.
Examples of positioning with a pillow. As shown, the pillow is placed under the overlay, not between the individual and the overlay.
Adjusting the Overlay, continued
Pillow Positioning
Warning: DO NOT place a pillow between the individual and the overlay. Doing so will reduce the effectiveness of the overlay.
Pillow positioning may be prescribed by a clinician. If a pillow is used for positioning, the pillow must be placed under the mattress
overlay, not between the individual and the overlay.
Transferring Onto the Overlay
To Next Page
Loading...