Changing the A-49 Settings
36
Specifying the Keyboard Velocity Value (KEY VELO)
For details on this value, refer to p. 8.
Value 0–127
0–9
Value Setting Explanation
0
TOUCH
(default)
The velocity value that’s transmitted will depend on the keyboard sensitivity and
change curve you specify in “Changing the Velocity Curve (VELO CURVE)” (p. 35).
1–127 FIXED VALUE
The velocity value you specify here will be transmitted regardless of how strongly
you play the keyboard.
Switching the Function of the [C2] Knob in
SuperNATURAL Mode (SN SETTING)
Button Setting Explanation
[+] button MODE 1
General purpose controller 4 (CC#19) will be assigned to the [C2]
knob.
[–] button
MODE 0
(default)
General purpose controller 2 (CC#17) will be assigned to the [C2]
knob.
* The eect that’s applied will depend on the sound module. For details, refer to the owner’s
manual of your sound module.
To Next Page
Loading...
