Panel Descriptions
12
Rear Panel
USB COMPUTER port
Use a USB cable to connect
the A-49 to your computer.
* Install the driver in your
computer before you make
this connection (p. 13).
HOLD jack
You can connect a pedal
switch (DP-2, DP-10; avail-
able separately) here and
use it as a hold pedal (p. 32).
EXPRESSION jack
You can connect an expression
pedal (EV-5, EV-7; available
separately) here and use it to
control various parameters and
functions (p. 32).
* Use only the specied expression pedal (EV-5,
EV-7; sold separately). By connecting any other
expression pedals, you risk causing malfunction
and/or damage to the unit.
MIDI OUT
connector
You can connect
this to the MIDI IN
connector of another
MIDI device so that the
A-49 can transmit MIDI
messages to it.
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all
the units before making any connections.
To Next Page
Loading...
