Changing the A-49 Settings
38
Assigning a Control Change Number (CC#)
[S1] [S2] buttons
For details on this value, refer to p. 8.
Value 0–127
0–9
Press either
Latched
Momentary
Button [S1][S2] buttons
[+] button
The button will alternately transmit ON (127) and OFF (0) each time you press it (Latched
operation)
[–] button
The button will transmit ON (127) when you press it, and OFF (0) when you release it
(Momentary operation)
Other controllers
Operate either
For details on this value, refer to p. 8.
Value 0–127
0–9
* You can’t assign CC#0 (Bank Select MSB) or CC#32 (Bank select LSB).
To Next Page
Loading...
