Roland Aerophone Pro - Sound Selection and Management; Selecting Preset Sounds; Editing and Saving User Scenes

9
Settings Used on this Instrument
Indication (Parameter)
Value Explanation
Key Function
This function lets you disable the performance keys, and shift the pitch up/down a semitone or whole tone.
1. Select “Key Function” and then press a performance key.
The name of the key you pressed is shown.
2. Press the [MENU] button to move the cursor to the lower row.
3. Select a function.
4. Press the [MENU] button to move the cursor to the upper row.
O Disables the keys.
Sax Key The keys operate as normal performance keys.
Semitone Down The keys shift down a semitone.
Semitone Up The keys shift up a semitone.
Wholetone Down The keys shift down a whole tone.
Wholetone Up The keys shift up a whole tone.
Language
English, Japanese,
Chinese
Species the display language.
User Scene Set
Registers the scene you are currently using as a user scene.
1. Select “User Scene Set” and then press the [MENU]
button.
2. Use the [-][+] (
C
/
A
) buttons to specify the user
scene number in which you want to save the
currently selected scene.
3. Press the [MENU] button.
A screen appears, allowing you to edit the name of
the scene.
4. If you want to edit the name, press the [J] (YES)
button.
[–] [+] (
C
/
A
) buttons
Moves cursor
[SCENE] (
=
/
?
) buttons
Changes the character
[S1] button Insert one character
[S2] button Delete one character
5. Press the [MENU] button.
A conrmation message appears.
6. To write the scene, press the [+] (
A
) button. If you
decide not to write, press the [-] (
C
) button.
Favorite Set
Registers the scene you are currently selecting as a
favorite.
1. Select “Favorrite Set” and then press the [MENU]
button.
2. Use the [-][+] (C/A) buttons or [SCENE CATEGORY]
knob to specify the favorite scene number in which
you want to save the currently selected scene.
3. Press the [MENU] button.
A conrmation message appears.
4. To write the scene, press the [+] (A) button. If you
decide not to write, press the [-] (C) button.
After writing is completed, the scene that you wrote
is shown.
Factory Reset
Returns the system settings to their factory-set state.
This operation does not erase the user scene / tone.
User Scene Clear Erases all user scenes/tones that are registered.
Version Displays the version of the unit’s system program.