17
BR-1180
SYSTEM SOFTWARE UPDATE
PROCEDURE
Updating from CD-R
Required Items
• Update data CD-ROM for service (#17041160)
1. Press the [POWER] button while pressing the [STOP] and [PLAY]
buttons.
Current version number is displayed.
2. When “Insert Disk” is displayed, take out the tray by pressing the eject
button for CD-R/RW.
3. Set the CD-R for updating into the tray and close it.
4. The new version number, date and check sum are displayed.
5. When the system displays “Update OK?”, press the [ENTER/YES]
button.
6. “Now Writing....” is displayed.
7. When “Complete” is displayed, press the [POWER] button and turn off
the unit’s power.
8. If you fail the update, please redo from Procedure 1.
Updating for SMF
Required Items
• Update data CD-ROM for service (#17041160)
Pleaseuse if from CD-R, changing in to media for sequencers.
* The SMF data contents of 32 files.
1. Press the [POWER] button while pressing the [STOP], [PLAY] and [REC]
buttons.
Current version number is displayed.
2. When “Waiting SMF” is displayed, send the SMF data (32 files) from the
sequencer, etc.
3. This work is repeated 32 times.
NOTE: Whe you sent the next file, please wait about 5 seconds.
4. When “Complete” is displayed, press the [POWER] button and turn off
the unit’s power.
TEST MODE
Required Item
• Ocscillator
• Uscilloscope
• Foot switch (FS-5U etc)
• Expression Pedal (EV-5 etc)
• MIDI Cable
• Audio or Headphone
• Tester
• Pharutom
• Noise Meter
• Blank CD-RW
• Device (inclade the Dgital In terminal)
How to enter the test mode
Press the [POWER] button while pressing the [REC TRACK1] and [UNDO/
REDO] buttons.
“1 DEVICE screen” is displayed, and the device check for test mode, item 1
will start.
* Continue pressing the [REC TRACK 1] and [UNDO/REDO] buttons until the
test mode screen appears.
Test item
The test mode items are as follows.
1. DEVICE
2. SW
3. FOOT SW
4. EXP PEDAL
5. ENCODER & LCD
6. FADER
7. LED
8. MIDI
9. MUTE
10. GUITAR A/B
11. AF/AD
12. MIC2 PHANTOM
13. GTR/MIC2 AUDIO
14. MIC1 A/B
15. MIC1 PHANTOM
16. MIC1 AUDIO
17. SUB MIX
18. SUB MIX AUDIO
19. LINE ON/OFF
20. LINE AUDIO
21. HARD DISK
22. CD-RW DRIVE
23. INITIALIZE HDD
24. POWER OFF