112
Track EQ Parameter Functions
Parameter List
This is a two-band equalizer that is independent for each track.
If you adjust the equalizer while listening to the sound, you
may notice a clicking noise. This is not a malfunction. If the
noise is objectionable, make adjustments while the sound is
not playing.
On/Off OFF, ON
This parameter turns the equalizer effect on/off.
LoG -12– +12 dB
This sets the gain (-12 to +12 dB) for the low-range equalizer
(shelving type).
LoF 40 Hz–1.5 kHz
This sets the center frequency (40Hz to 1.5 kHz) for the low-range
equalizer (shelving type).
HiG -12 – +12 dB
This sets the gain (-12 to +12 dB) for the high-range equalizer
(shelving type).
HiF 500 Hz–18 kHz
This sets the center frequency (500 Hz to 18 kHz) for the high-range
equalizer (shelving type).
To Next Page
Loading...
