76
Editing the Performance on a Track (Track Editing)
Exchanging Data (Track Exchange)
Perform the procedure given below to exchange the data
between two tracks.
Example: exchanging all the data on track 1 with all the
data on track 2
fig.02-352
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to “TRK,”
and press [ENTER].
fig.02-353d
3. Press CURSOR [ ] [ ] to move the cursor to “XCG,”
and press [ENTER].
fig.R08-27
4. Use CURSOR [ ] [ ] and the TIME/VALUE dial to
select the two tracks/V-Tracks to exchange data.
5. When you are ready to execute the exchange, press
[ENTER].
The display will ask “Are you sure?,” so that you can
confirm the operation.
6. Press [ENTER].
The exchange is executed.
7. Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, “Keep power on!” appears in the upper line
of the display, while the lower line shows what is being
processed.
Track 1
Track 2
Track 1
Track 2
A
A
B
B
C
C
D
D
E
E
Time
To Next Page
Loading...
