Roland BR-900CD - Changing the Position (Pan) of the Drum Sounds

138
Using the Drum Kits
Erasing drum sounds
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to
“TONE,” and press [ENTER].
3. Press CURSOR [ ] [ ] to move the cursor to
“ERASE,” and press [ENTER].
fig.03-523d
4. Turn the TIME/VALUE dial to specify the erase drum
kit, then press [ENTER].
S1–5: Song Drum Kit 1–5
fig.03-524d
5. Turn the TIME/VALUE dial to specify the erase drum
sound, then press [ENTER].
* Select “ALL” if you want to erase all of the drum sounds in
the kit.
fig.03-525d
“Are you sure?” appears.
6. Press [ENTER] (YES) to erase the drum sound.
To cancel, press [EXIT] (NO).
7. Press [EXIT] to return to the Play screen.
Changing the position (pan) of
the drum sounds
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to
“TONE,” and press [ENTER].
3. Press CURSOR [ ] to move the cursor to “PAN,” and
press [ENTER].
fig.03-526d
4. Turn the TIME/VALUE dial to specify the drum kit
whose panning you want to change, then press
[ENTER].
S1–5: Song Drum Kit 1–5
fig.03-527d
5. Use [CURSOR] and the TIME/VALUE dial to specify
the drum sound whose panning is being changed and
the pan setting.
fig.03-528d
* When you press [RHYTHM PAD], causing the indicator to
light/flash, you can then set the drum sounds by tapping REC
TRACK [1]–[6].
* Pressing [ENTER] sets this to “C00” (Center).
6. Press [EXIT] to return to the Play screen.