144
Creating Audio CD
3. Press CURSOR [ ] [ ] to move the cursor to
“AUDIO,” and press [ENTER].
The Audio CD menu screen will appear.
fig.05_CDaudio
4. Press CURSOR [ ] [ ] to move the cursor to
“FINAL,” and press [ENTER].
The message “Finalize CD OK?” will appear.
fig.05_CDfinalize
5. Press [ENTER] (YES). (If you want to cancel
finalization, press [EXIT] (NO).)
Finalization will begin and the state of progress will be
displayed. When the message “Complete” appears and
the track buttons begin to flash, the finalization is
complete.
6. Press [EXIT] several times to return to the Play screen.
7. Press the CD-R/RW drive’s EJECT button to eject the
disc.
This enables the CD-R/RW disc to be played back on
regular consumer CD players.
• Once finalization has been started, it will not be possible
to cancel this process.
• In certain cases, a period of several seconds will pass
before the disc is actually ejected.
To Next Page
Loading...
