Roland CM-500 - 4. Turning On The Power; Turning The Power Off; Default Settings

10
Connection
Power connector
Power cord
Parallel interface cable
(Centyonics)
*Parallel interface cable
or Serial interface cable
Serial interface cable
(RS-232C)
Serial connector
(RS-232C)
Parallel connector
(Centronics)
* Cables are available separately. One which you are sure
matches the model of computer being used should be selected.
3-2 Turning on the Power
Use the switch at the front-left surface of the unit to turn on the power.
Press the side of the
switch marked “ –”.
Power
outlet