Roland CM-500 - 5. About The GS Format; (1) Parts; (2) Number of Sounds That Can Be Played At The Same Time (Maximum Polyphony)

14
Material Loading Position
:Movable Pinch
Roller (Left)
: Movable Pinch
Roller (Right)
: Movable Pinch
Roller (Middle)
:Grit Roller
CM-500
CM-400
The right-hand movable pinch roller can be moved within this range.
When loading material with a width other than one indicated above,
move the right-hand movable pinch roller.
(1*) Position of the pinch roller (middle) when using material with a width of 30" or 36"
(2*) Position of the pinch roller (middle) when using material with a width of 48" or 54"
(1*) Position of the pinch roller (middle) when using material with a width of 30" or more.
CM-300
* The CM-300 has no middle pinch roller.
* Acceptable material widths
50—540 mm (2"—21" ) ,
582—915 mm (23"—36" )
54"(approx.1372mm)
12" (approx.305mm)
Material with
a width
of 48" and 54"
* Make sure the pinch rollers are positioned above the grit rollers.
24" (approx.610mm)
18" (approx.457mm)
Material
(1*)
(2*)
6" (approx.152m
m
30" (approx.762mm)
36" (approx.914mm)
48" (approx.1219mm)
46"(approx.1178mm)
* Make sure the pinch rollers are positioned above the grit rollers.
36"(approx.915mm)
* Make sure the pinch rollers are positioned above the grit rollers.
(1*)
Material with
a width of 36"
Material with
a width of 30"
Material with
a width of 24"
Material with
a width of 18"
Material with
a width of 12"
Material with
a width
of 36" and 46"
Material with
a width of 30"
Material with
a width of 24"
Material with
a width of 18"
Material with
a width of 12"
Material with
a width of 6"
Material with
a width of 6"
Material with
a width
of 24" and 30" and 36"
Material with
a width of 18"
Material with
a width of 12"
Material with
a width of 6"
54" (approx.1372mm)