Roland D-50 - 7. PATCH CONTROL

EDITING PERFORMANCE CONTROLLING FUNCTIONS
7, PATCH CONTROL
Patch Controls determine how the Control Functions actually affect
the Upper and ‘the Lower Tones.
Step 1: Push the right Scroll Button
TL 1 deep seateobeotcaane abate teat akeiecdcot seen eae eo eo]
WHOLE
SP
C4
Bal
34
shes
obs cde obe
ste
fee
C7
fa Co Co
oo
Co
C.F
C4
25
4
Step 2:Select “Control” with the
corresponding Selector Button.
Tai sesesdeioacoint Patch Edit Menu
<P-Hame> (Control) (Qutruts (Chase) (MIBI>D
e€xiT
SO
ao
a
<
Step 3:Select the Control function to be edited
and change the value with the Joystick.
Tei sasoktsceosdctakdcttoe Conmbrol Edit
Bend 12 AFPBt12 Port Ba Port UL Hold UL
xi
Co
a
25
——
Hoid Mode
This selects the Tone that should take on the Pedal
Hold effect.
U_ Pedal Hold works on the Upper Tone.
L Pedal Hold works on the Lower Tone.
The
variable
range
set
here
may
result
differently
UL
Pedal
hotd
works
on
the
both
Tones.
depending
on
the
setting
of
the
Tone
Parameters,
‘When
the
Key
mode
is
Whole,
Pedal
Hold
always
works
whichever
of
the
above
three
modes
may
be
Bender Range
This sets the variable range of the pitch change
caused by moving the Bender lever right and left
from 0 to 12 (1 octave).
. + selected,
Aftertouch, Pitch Bender
This sets the sensitivity of the aftertouch
effect on pitch. -12 to +12 are valid.
Higher vatues mean higher sensitivity.
Portamento Mode
This selects the Tone that should take on
the Portamento effect.
A Minus setting decreases the pitch, and
a
plus
setting
increases
it.
U_
Pedal
Hold
works
on
the
Upper
Tone.
L Pedal Hold works on the Lower Tone.
.
UL
Pedal
hold
works
on
the
both
Tones.
Portamento
Time
°
>
.
;
When
the
Key
Mode
is
Whole.
Portamento
always
This
sets
the
Portamento
time
from
one
works
whichever
of
the
above
three
modes
may
be
note to another. 1 to 100 are valid. Higher
selected,
values make the time longer,
27