Roland D-50 - Page 60

TONE PARAMETERS
@Hft
This
sets
the
frequency
where
the
gain
is
altered
in
the
middie
to high range, from 250Hz to 9.5kHz (22 points).
@HO
This sets the width of the frequency band where the gain is
boosted or cut from 0.3 to 6.0 (9 points). With a higher value,
the frequency band is narrower, and vice versa.
T Level O
A Frequency ! Frequency
Hf Hf
HQ is Hight HQ is low
@Hg
This sets the gain of the Hf frequency from —12 to +12dB (in
1dB step, 25 points). "+” settings raise the gain and "—” settings
lower it,
+ +
Hf
Level O Level 0
uf Frequency Frequency
28