Roland D-50 - Page 97

DATA TRANSFER WITH MEMORY CARD
step 1 Connect the Memory Card to the D—50.
step
2
Turn
the
Memory
Protect
of
the
D-—50
to
OFF.(See
page
49.)
step 3 Push the Data Transfer Button.
# Data Transfer
step 4 * Select "CARD— INT” with the corresponding Selector Button.
+ Data Transfer + C Card + Int }
Are you sure ? ... <Enter-“Exit?>
To cancel the data transfer mode, simply push the Exit Button,
step 5 Hit the Enter Key.
When the data transfer is completed, the Display changes as below,
then returns to the Play Mode indication.
step 6 Return the Memory Protect of the D-50 to ON.
*When the data fails to be transferred to the D—5O properly, the
Display responds with :
f’* Data Transfer #* C Int + Gard J
Verify Error . tRetrs? (Cancel?
Mo Co Co Ce fo oo oo
tf
Retry Cancel
To transfer the data from the Memory Card again, assign RETRY
with the Selector Button and repeat the transfer procedure after
carefully reading the instructions of the Memory Card.
To leave this mode, select CANCEL with the Selector Button.
67