Roland DUO-CAPTURE EX - Page 27

Appendix
27
4
8, 10
5
7
9
New Device
3
8. Click the [Test Setup] icon.
The [Test Setup] icon turns on (blue).
MEMO
If you have a sound module connected to the DUO-CAPTURE EX’s MIDI OUT connector, a fairly
loud sound will be heard when you perform the next step. Reduce the volume of your sound
module before continuing.
9. Click the DUO-CAPTURE EX’s [ ] button.
A conrmation sound is played from the sound module.
10. Click the [Test Setup] icon.
The [Test Setup] icon turns o (gray).
11. Close the “MIDI Studio” window or the “Audio MIDI Setup” window.