Roland DUO-CAPTURE EX - Page 32

Appendix
32
Mac OS X
1. Open “System Preferences” and click the [DUO-CAPTURE EX] icon.
The “Driver Settings” panel appears.
Setting Explanation
Audio Buer Size
You can adjust the USB driver’s input and output audio buer size.
Decrease the buer size to decrease latency. Increase the buer size if audio drops
out.
* After adjusting the buer size, make sure to restart all programs that are using the
DUO-CAPTURE EX. If using software that has an “audio device test” function, run the
test function.
Recording Margin
If audio drops out or if noise is heard even if you have adjusted the buer size setting
in the software and adjusted the “Audio Buer Size” as explained above, increase the
recording margin setting.
Recording Timing
Adjust this setting if the timing of the recorded audio data is o.
* If the audio software is running, the new setting will not be applied immediately
when the [Apply] button is clicked. Quit all audio software; the new setting will be
applied the next time you start the software.