11
Driver Installation
Windows 7/Windows Vista
9. When “Installation has been completed.” appears, click [Close].
Close the "DUO-CAPTURE Driver Setup" dialog box.
10. Open the “Control Panel,” click [Hardware and Sound], and then click [Sound].
If you have selected Icon view or Classic view, double-click [Sound].
11. Click the [Playback] tab, select the DUO-CAPTURE’s [OUT], and then click [Set
Default].
12. Click [OK].
Proceed to p. 14
If you cannot select the DUO-CAPTURE, refer to “Using the DUO-CAPTURE” (p. 18).
If the DUO-CAPTURE is selected as the output device, the computer’s audio alerts will be played
using the DUO-CAPTURE; they will not be heard from the computer’s speakers.
To Next Page
Loading...
