Roland EV-1-WL - Page 40

40
Parameter Value Explanation
DIRECT MIX 0–100
Adjusts the volume
of the direct sound.
Setting this to 0 cuts the
direct sound.
2x2 CHORUS parameters
Parameter Value Explanation
LOW RATE 0–100
Adjusts the speed of the
chorus eect for the low
frequency range.
LOW DEPTH 0–100
Adjusts the depth of the
chorus eect for the low
frequency range. To use
this as a doubling eect,
set this to “0”.
LOW PRE DELAY 0.0–40.0ms
Adjusts the delay of
the eect sound in the
low-frequency range.
Extend the pre-delay to
produce the sensation
of multiple sounds
(doubling eect).
LOW LEVEL 0–100
Adjusts the volume of
the chorus sound in the
low-frequency range.
DIRECT MIX 0–100
Adjusts the volume of
the direct sound.
HIGH RATE 0–100
Adjusts the speed of
the chorus eect for the
high frequency range.