Roland F-110 - MIDI Transmit Channel Settings (MIDI Transmit Channel); Sending Recorded Data to a MIDI Device (Composer MIDI Out)

58
Various Settings
This setting specifies the MIDI channel on which the F-110
will transmit.
MIDI uses sixteen “MIDI channels,” which are numbered 1
through 16. By connecting MIDI devices and specifying the
appropriate MIDI channel for each device, you can play or
select sounds on those devices.
The F-110 will receive all sixteen channels (1–16).
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Press and hold the [Others] button and use the [–]
or [+] button to select “Ch..”
3.
Release the [Others] button to see the current
setting.
4.
Use the [-] [+] buttons to change the setting.
If you turn this “OFF,” the F-110 will not transmit MIDI
data.
For details on connecting MIDI devices, refer to
“Connecting to MIDI Devices” (p. 64).
5.
Press the [Reverb] or [Transpose] button to leave
Function mode.
When Composer MIDI Out is “On,” you can send performance
data recorded with the F-110 to a connected MIDI device or
computer.
1.
Hold down the [Reverb] button and press the
[Transpose] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Press and hold the [Others] button and use the [–]
or [+] button to select “Out.”
3.
Release the [Others] button to see the current
setting.
4. Use the [–] [+] buttons to change the setting.
5. Press the [Reverb] or [Transpose] button to leave
Function mode.
MIDI Transmit Channel Settings
(MIDI Transmit Channel)
Settings (Channel)
OFF, 1–16
Sending Recorded Data to a MIDI
Device (Composer MIDI Out)
Setting Explanation
Performance data is transmitted.
Performance data is not transmitted.
F-110_r_e.book 58 ページ ２００９年６月３０日 火曜日 午後１２時６分