Roland F-110 - Playing Sounds of an Audio Player through the F-110; Turning off the Power

63
Connecting to Other Devices
fig.F-110Audio2-e.eps_88
1.
Turn the volume all the way down on the F-110 and
on the audio player you’re about to connect.
2. Turn off the power to the F-110 and connected
audio player.
3.
Use audio cables (sold separately) to make the
connection.
4.
Switch on the connected audio player.
5.
Switch on the F-110.
6.
Adjust the volume level on the F-110 and the
connected audio player.
The sounds from the connected audio player are played by
the F-110.
Adjust the volume by using the controls of your audio
player.
Turning Off the Power
1. Turn the volume all the way down on the F-110 and
on the audio player you’re about to connect.
2.
Turn off the F-110.
3.
Turn off the connected audio player.
Playing Sounds of an Audio Player through the F-110
Input jacks
Digital audio player, etc.
Output (Line Out)
F-110_r_e.book 63 ページ ２００９年６月３０日 火曜日 午後１２時６分