Various Settings (Function Mode)
Display Value Explanation
F08
1
,
2
Changing the Tuning Method (Stretch Tuning)
This setting changes the type of stretch tuning, a tuning method that is used specically for pianos, in which the high notes are tuned
slightly sharper and the low notes are tuned slightly atter.
Normally, you should use the “1” setting (standard tuning curve).
F0g
F10
1
(Sostenuto, Soft),
2
(Start/Stop),
3
(Intro/Ending),
4
(Variation),
5
(Fill-in),
6
(Leading Bass)
Changing How the Pedals Work
Here you can assign the functions of the center pedal (
F0g
) and left pedal (
F10
).
1
0 Sostenuto pedal (
F0g
), soft pedal (
F10
)
2
0 Same function as the [s (Start/Stop)] button
3
0 Intro/Ending function on/o (same function as the [y(Intro/Ending)] button)
4
0 Variation on/o (same function as the [x (Variation)] button)
5
0 Fill-in
6
0 Leading Bass function on/o
F11
Off
,
On
Specifying How the Bass Part Behaves (Leading Bass)
The function that sounds the lowest note of a ngered chord as the bass tone is called “Leading Bass.”
O 0 The bass part of the rhythm plays the root of the chord. For example, if you play the chord E-G-C (C major), the note C is
sounded as the bass.
On 0 The bass part plays the lowest note of the chord you play. If you play the chord E-G-C (C major), the note E is sounded as the
bass.
The Leading Bass feature is always on while Split is o.
F12
1
(Intelligent),
2
(Standard)
Chord Recognition When Split Is On
Sets how the unit recognizes rhythm chords while Split function (p. 2) is on.
Intelligent 0 Plays chords even when basic chord tones are missing, allowing you to generate chords with very simple keyboard
playing. For details on how to play chords, refer to “Chord Fingering List” at the end of this manual.
Standard 0 Normal chord recognition.
F13
Off
,
On
Preventing Doubled Notes When Connected to a Sequencer
(Local Control)
If a software synthesizer is connected to USB MIDI, turn this item “OFF.”
Since most software synthesizer have their Thru function turned on,
notes you play on the keyboard may be sounded in duplicate, or get
dropped. To prevent this, you can enable the “Local O” setting so that
the keyboard and internal sound generator will be disconnected.
F14
U.01
–
U.10
(USER 01–10)
N.01
–
N.gg
(USB 01–99)
Copying a Song (Copy Song)
A song that you recorded on this unit can be copied to a USB ash drive.
The copy-source song number is displayed; use the [-] [+] buttons to select the desired number, and press the [s] button to conrm
it.
The copy-destination song number is displayed; use the [-] [+] buttons to select the desired number, and press the [s] button to
conrm it.
F15
OFF
,
On
Bluetooth Function
Turns the Bluetooth function on/o.
F16
-P-
,
-N-
Bluetooth Page-Turning/MIDI Switching
Species whether the Bluetooth function is used to turn pages or to transmit/receive MIDI messages.
-P-
0 Operates (turns pages in) a music score display app on your mobile device
-N-
0 Transmits/receives MIDI messages
F17
1
,
2
Bluetooth Page-Turning Pedal Assignment
Assigns the pedals of this unit to act as key operations for the music score display app that you’re using.
1
0 Cursor Up/Down
2
0 Page Up/Page Down
Software
Synthesizer
Local Control
Sound Generator
USB MIDI
In
USB MIDI
Out
Computer
page
14
page
14
page
14
12
To Next Page
Loading...
Need help?
General
