140
Editing Songs
This function changes the duration (time from note-on to note-off) of
notes within a specified area. Depending on the setting, you can also
create staccato or tenuto.
For details on the settings, refer to
Basic Operation for Track
Editing
(p. 133).
fig.ChangeDur
The sequencer data of two phrase tracks or patterns will be
combined into one.
For details on the settings, refer to
Basic Operation for Track
Editing
(p. 133).
fig.Merge
Changing the Length of Notes
(Change Duration)
Parameter
Value Explanation
Track/Pattern
TRK ALL,
TRK 1–16,
PTN001–100
Phrase track(s) or pattern
whose durations will be
changed
TRK ALL:
Phrase tracks 1–16
TRK 1–16:
Specified phrase track
PTN001–100:
Specified pattern
Ch/Part ALL, Ch 1–16 MIDI channel(s) of notes
for which duration will be
changed
ALL:
Changes the duration for notes of all
MIDI channels.
Ch 1–16:
Changes the duration for notes of a
specific MIDI channel only.
Measure 0001– Range of measures whose
durations will be changed
If you set “For” to
“ALL,” all measures will
be specified.
For 1–ALL
Bias -4800–4800 Adds a fixed bias amount
to all durations.
Magnify 0–200% Set this parameter if you
wish to increase or de-
crease durations by a spec-
ified ratio.
When set to “100%,” no
change is made. A value
of “101%” or higher in-
creases the duration; val-
ues of “99%” or lower
decrease the duration.
For example, to halve
duration, set this param-
eter to “50%.” To double
durations, set this pa-
rameter to “200%.”
Range Min 0 (C -)–127 (G9) Range of note numbers for
which duration will be
changed
You can also specify the
key range by pressing
keys on the keyboard.
Range Max
Combining Two Phrase Tracks or
Patterns into One (Merge)
Parameter
Value Explanation
Src Track/Pat-
tern
TRK 1–16,
PTN001–100
Phrase track or pattern to
be merged
TRK 1–16:
Specified phrase track
PTN001–100:
Specified pattern
* After the Merge operation has been executed, no
sequencer data will remain in this track.
Dst Track/Pat-
tern
TRK 1–16,
PTN001–100
Merge-destination phrase
track or pattern
TRK 1–16:
Specified phrase track
PTN001–100:
Specified pattern
* After the Merge operation has been executed, the
sequencer data will be combined into this track.
Fantom-Xa_e.book 140 ページ ２００４年１０月２２日 金曜日 午後２時３分
To Next Page
Loading...
