79
Creating a Performance
1.
Access the PERFORM LAYER screen, and select the Performance whose settings you wish to modify (p. 67).
2.
Press [F6 (MIDI)].
The MIDI FILTER screen appears.
fig.MidiFilter
MIDI Settings
Parameter
Value Explanation
Rx
OFF, ON (
✔
) For each part, specify whether MIDI messages will be received (ON), or not (OFF).
If this is “OFF,” the part will not respond. Normally, you should leave this “ON,” but you
can turn it “OFF” when you do not want a specific part to be playing during song playback.
Ch 1–16 MIDI receive channel for each part
PC (Program Change) OFF, ON (
✔
) For each MIDI channel, specify whether MIDI messages will be received (ON), or not (OFF).
BS (Bank Select)
PB (Pitch Bend)
PA (Polyphonic Key Pressure)
CA (Channel Pressure)
Md (Modulation)
Vo (Volume)
Pn (Pan)
Ex (Expression)
Hd (Hold-1)
Fantom-Xa_e.book 79 ページ ２００４年１０月２２日 金曜日 午後２時３分
To Next Page
Loading...
