Roland Fantom XR

17
Multisample editing functions
Once you’ve edited a multisample, the word
“*” appears beside the multisample name.
Be aware that if you turn off the power or select
another screen when the “*” indication is
shown, the changes you made to the
multisample will be lost.
fig.04-35
1. In the Multisample Edit screen, press
[SHIFT] so it lights, and then press .
The Multisample Name window will open.
fig.04-36
2. Assign a name to the multisample.
* For details on how to assign a name, refer to
“Assigning a Name” (Owner’s Manual; p. 39).
3. When you’ve finished inputting a name,
press [ENTER].
The write-destination group will appear.
fig.04-37
4. Turn the VALUE dial or use or
to select the multisample number.
5. Press [ENTER].
A message will ask you to confirm the
Write operation.
fig.04-38
6. To write the data, press [ENTER].
To cancel, press [EXIT].
Never turn off the power while data is
being written.
Saving a multisample
Fantom-XR-V2_e.book 17 ページ ２００７年５月２２日 火曜日 午前１１時１分